SDIP-64 Foorprint

[[e-mail] [kicad-users]]

Hi Folks,


I have just found/joined the group and am looking for some help already


I am building a video board for an Z80 based processor and will be using a V9958 VDP, this comes in a 64 pin shrink-DIP package and won't easily (although it can be "force-fit") mount on a 0.1" prototype board.


I am looking to create a small adapter board to break out a 64-pin SDIP socket to 0.1" hole spacing. Using the dimensions off a data sheet that I found, I have created a footprint that "looks" close to what is required, but I am not very confident that it is correct and I'd rather use a proven design before I send the board off to get made.


I did some "Googling", searching for an existing KiCad model without success, which was a bit of a surprise, I expected that other hobbyists might have had a need for a similar board and created a footprint.


So, I was wondering whether anyone here has a 64-pin SDIP footprint that they could share please. It would be even better if they had a matching 3D model too


regards
Dave

[keruseykaryu-/[e-mail] [kicad-users]]

(module SDIP64 (layer F.Cu)
(at 0 0)
(fp_text reference SDIP64 (at 0 -1.5) (layer F.SilkS)
(effects (font (size 1.2 1.2) (thickness 0.3)))
)
(fp_text value VAL** (at 0 1.5) (layer F.SilkS) hide
(effects (font (size 1.2 1.2) (thickness 0.3)))
)
(fp_line (start -29 1) (end -29 8) (layer F.SilkS) (width 0.3))
(fp_line (start -29 -8) (end -29 -1) (layer F.SilkS) (width 0.3))
(fp_arc (start -29 0) (end -29 -1) (angle 90) (layer F.SilkS) (width 0.3))
(fp_arc (start -29 0) (end -28 0) (angle 90) (layer F.SilkS) (width 0.3))
(fp_line (start -29 8) (end 29 8) (layer F.SilkS) (width 0.3))
(fp_line (start 29 8) (end 29 -8) (layer F.SilkS) (width 0.3))
(fp_line (start 29 -8) (end -29 -8) (layer F.SilkS) (width 0.3))
(pad 1 thru_hole rect (at -27.59 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole oval (at -25.81 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 3 thru_hole oval (at -24.03 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 4 thru_hole oval (at -22.25 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 5 thru_hole oval (at -20.47 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 6 thru_hole oval (at -18.69 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 7 thru_hole oval (at -16.91 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 8 thru_hole oval (at -15.13 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 9 thru_hole oval (at -13.35 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 10 thru_hole oval (at -11.57 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 11 thru_hole oval (at -9.79 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 12 thru_hole oval (at -8.01 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 13 thru_hole oval (at -6.23 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 14 thru_hole oval (at -4.45 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 15 thru_hole oval (at -2.67 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 16 thru_hole oval (at -0.89 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 17 thru_hole oval (at 0.89 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 18 thru_hole oval (at 2.67 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 19 thru_hole oval (at 4.45 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 20 thru_hole oval (at 6.23 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 21 thru_hole oval (at 8.01 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 22 thru_hole oval (at 9.79 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 23 thru_hole oval (at 11.57 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 24 thru_hole oval (at 13.35 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 25 thru_hole oval (at 15.13 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 26 thru_hole oval (at 16.91 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 27 thru_hole oval (at 18.69 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 28 thru_hole oval (at 20.47 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 29 thru_hole oval (at 22.25 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 30 thru_hole oval (at 24.03 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 31 thru_hole oval (at 25.81 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 32 thru_hole oval (at 27.59 9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 33 thru_hole oval (at 27.59 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 34 thru_hole oval (at 25.81 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 35 thru_hole oval (at 24.03 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 36 thru_hole oval (at 22.25 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 37 thru_hole oval (at 20.47 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 38 thru_hole oval (at 18.69 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 39 thru_hole oval (at 16.91 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 40 thru_hole oval (at 15.13 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 41 thru_hole oval (at 13.35 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 42 thru_hole oval (at 11.57 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 43 thru_hole oval (at 9.79 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 44 thru_hole oval (at 8.01 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 45 thru_hole oval (at 6.23 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 46 thru_hole oval (at 4.45 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 47 thru_hole oval (at 2.67 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 48 thru_hole oval (at 0.89 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 49 thru_hole oval (at -0.89 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 50 thru_hole oval (at -2.67 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 51 thru_hole oval (at -4.45 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 52 thru_hole oval (at -6.23 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 53 thru_hole oval (at -8.01 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 54 thru_hole oval (at -9.79 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 55 thru_hole oval (at -11.57 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 56 thru_hole oval (at -13.35 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 57 thru_hole oval (at -15.13 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 58 thru_hole oval (at -16.91 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 59 thru_hole oval (at -18.69 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 60 thru_hole oval (at -20.47 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 61 thru_hole oval (at -22.25 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 62 thru_hole oval (at -24.03 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 63 thru_hole oval (at -25.81 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 64 thru_hole oval (at -27.59 -9.5504) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
)

[[e-mail] [kicad-users]]

HI,

thanks very much - that's perfect - and even better, it is exactly the same as my attempt, so I am encouraged that I seem to be able to make usable models!


I guess that as you have made this model, you must have used it and soldered the resultant board?


I was a bit concerned with mine (and your model is obviously the same) whether the very tight separation between the solder pads was too tight for hand soldering and thought about reducing the diameter of the solder pad slightly.


Did you find any difficulty when soldering the component to the PCB?


regards
Dave

[keruseykaryu-/[e-mail] [kicad-users]]

I didn't use this footprint yet.



If you plan to make the dual side PCB with platted holes in fab you can reduce the pads diameter a bit. Of course you have to keep the minimum annual ring.
If you plan to make the single side PCB (especially at home) the pads might be too small in X axis, and need to be enlarged.


About hand soldering. I'm very often soldering QFP64/48/100 with pitch less than 1mm by hand, so 1,78mm pitch isn't any challenge for me. ;-)


Regards
Kerusey Karyu

[[e-mail] [kicad-users]]

Hi,

thanks very much - I thought that I had imported it correctly into my board design, but I obviously made an error adding the model to the library.


When I try to add it in PCBnew, the file appears to be empty and I notice that the file format is very different to the model that I created (below). I am using KiCad PCBNew Build 2013-07-07 BZR 4022. Is your model file compatible with that Version of PCBNew?


regards
Dave


PCBNEW-LibModule-V1 06/06/2014-17:43:11
$INDEX
SDIP-64
$EndINDEX
$MODULE SDIP-64
Po 29000 24000 0 15 00200000 00000000 ~~
Li SDIP-64
Cd SDIP-64
Sc 00000000
Op 0 0 0
T0 0 -100 350 350 2700 120 N V 21 "U"
T1 0 100 350 350 2700 120 N V 21 "SDIP-64"
DS -250 250 21950 250 120 21
DS 21950 250 21950 -7750 120 21
DS 21950 -7750 -250 -7750 120 21
DS -250 -7750 -250 250 120 21
$PAD
Sh "1" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 0 0
$EndPAD
$PAD
Sh "2" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 700 0
$EndPAD
$PAD
Sh "3" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 1400 0
$EndPAD
$PAD
Sh "4" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 2100 0
$EndPAD
$PAD
Sh "5" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 2800 0
$EndPAD
$PAD
Sh "6" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 3500 0
$EndPAD
$PAD
Sh "7" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 4200 0
$EndPAD
$PAD
Sh "8" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 4900 0
$EndPAD
$PAD
Sh "9" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 5600 0
$EndPAD
$PAD
Sh "10" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 6300 0
$EndPAD
$PAD
Sh "11" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 7000 0
$EndPAD
$PAD
Sh "12" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 7700 0
$EndPAD
$PAD
Sh "13" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 8400 0
$EndPAD
$PAD
Sh "14" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 9100 0
$EndPAD
$PAD
Sh "15" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 9800 0
$EndPAD
$PAD
Sh "16" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 10500 0
$EndPAD
$PAD
Sh "17" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 11200 0
$EndPAD
$PAD
Sh "18" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 11900 0
$EndPAD
$PAD
Sh "19" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 12600 0
$EndPAD
$PAD
Sh "20" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 13300 0
$EndPAD
$PAD
Sh "21" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 14000 0
$EndPAD
$PAD
Sh "22" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 14700 0
$EndPAD
$PAD
Sh "23" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 15400 0
$EndPAD
$PAD
Sh "24" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 16100 0
$EndPAD
$PAD
Sh "25" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 16800 0
$EndPAD
$PAD
Sh "26" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 17500 0
$EndPAD
$PAD
Sh "27" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 18200 0
$EndPAD
$PAD
Sh "28" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 18900 0
$EndPAD
$PAD
Sh "29" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 19600 0
$EndPAD
$PAD
Sh "30" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 20300 0
$EndPAD
$PAD
Sh "31" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 21000 0
$EndPAD
$PAD
Sh "32" C 600 600 0 0 0
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 21700 0
$EndPAD
$PAD
Sh "33" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 21700 -7500
$EndPAD
$PAD
Sh "34" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 21000 -7500
$EndPAD
$PAD
Sh "35" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 20300 -7500
$EndPAD
$PAD
Sh "36" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 19600 -7500
$EndPAD
$PAD
Sh "37" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 18900 -7500
$EndPAD
$PAD
Sh "38" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 18200 -7500
$EndPAD
$PAD
Sh "39" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 17500 -7500
$EndPAD
$PAD
Sh "40" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 16800 -7500
$EndPAD
$PAD
Sh "41" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 16100 -7500
$EndPAD
$PAD
Sh "42" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 15400 -7500
$EndPAD
$PAD
Sh "43" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 14700 -7500
$EndPAD
$PAD
Sh "44" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 14000 -7500
$EndPAD
$PAD
Sh "45" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 13300 -7500
$EndPAD
$PAD
Sh "46" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 12600 -7500
$EndPAD
$PAD
Sh "47" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 11900 -7500
$EndPAD
$PAD
Sh "48" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 11200 -7500
$EndPAD
$PAD
Sh "49" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 10500 -7500
$EndPAD
$PAD
Sh "50" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 9800 -7500
$EndPAD
$PAD
Sh "51" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 9100 -7500
$EndPAD
$PAD
Sh "52" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 8400 -7500
$EndPAD
$PAD
Sh "53" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 7700 -7500
$EndPAD
$PAD
Sh "54" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 7000 -7500
$EndPAD
$PAD
Sh "55" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 6300 -7500
$EndPAD
$PAD
Sh "56" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 5600 -7500
$EndPAD
$PAD
Sh "57" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 4900 -7500
$EndPAD
$PAD
Sh "58" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 4200 -7500
$EndPAD
$PAD
Sh "59" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 3500 -7500
$EndPAD
$PAD
Sh "60" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 2800 -7500
$EndPAD
$PAD
Sh "61" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 2100 -7500
$EndPAD
$PAD
Sh "62" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 1400 -7500
$EndPAD
$PAD
Sh "63" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 700 -7500
$EndPAD
$PAD
Sh "64" C 600 600 0 0 1800
Dr 300 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 0 -7500
$EndPAD
$EndMODULE SDIP-64
$EndLIBRARY

[keruseykaryu-/[e-mail] [kicad-users]]

My footprint might be incompatible with BZR4022-stable. I don't remember if this version can import PRETTY footprints in *.kicad_mod files. I no longer use this version.
It was made and exported by BZR4932-production. It is readable by BZR4416-testing, the last relatively stable PCBnew without FP-LIB-TABLE.


Try this one:
PCBNEW-LibModule-V1 2014-06-08 11:43:24
# encoding utf-8
Units mm
$INDEX
SDIP64
$EndINDEX
$MODULE SDIP64
Po 0 0 0 15 53942FBF 00000000 ~~
Li SDIP64
Sc 0
AR
Op 0 0 0
T0 0 -1.5 1.2 1.2 0 0.3 N V 21 N "SDIP64"
T1 0 1.5 1.2 1.2 0 0.3 N I 21 N "VAL**"
DS -29 1 -29 8 0.3 21
DS -29 -8 -29 -1 0.3 21
DA -29 0 -29 -1 900 0.3 21
DA -29 0 -28 0 900 0.3 21
DS -29 8 29 8 0.3 21
DS 29 8 29 -8 0.3 21
DS 29 -8 -29 -8 0.3 21
$PAD
Sh "1" R 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -27.59 9.5504
$EndPAD
$PAD
Sh "2" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -25.81 9.5504
$EndPAD
$PAD
Sh "3" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -24.03 9.5504
$EndPAD
$PAD
Sh "4" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -22.25 9.5504
$EndPAD
$PAD
Sh "5" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -20.47 9.5504
$EndPAD
$PAD
Sh "6" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -18.69 9.5504
$EndPAD
$PAD
Sh "7" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -16.91 9.5504
$EndPAD
$PAD
Sh "8" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -15.13 9.5504
$EndPAD
$PAD
Sh "9" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -13.35 9.5504
$EndPAD
$PAD
Sh "10" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -11.57 9.5504
$EndPAD
$PAD
Sh "11" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -9.79 9.5504
$EndPAD
$PAD
Sh "12" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -8.01 9.5504
$EndPAD
$PAD
Sh "13" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -6.23 9.5504
$EndPAD
$PAD
Sh "14" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -4.45 9.5504
$EndPAD
$PAD
Sh "15" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -2.67 9.5504
$EndPAD
$PAD
Sh "16" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -0.89 9.5504
$EndPAD
$PAD
Sh "17" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 0.89 9.5504
$EndPAD
$PAD
Sh "18" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 2.67 9.5504
$EndPAD
$PAD
Sh "19" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 4.45 9.5504
$EndPAD
$PAD
Sh "20" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 6.23 9.5504
$EndPAD
$PAD
Sh "21" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 8.01 9.5504
$EndPAD
$PAD
Sh "22" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 9.79 9.5504
$EndPAD
$PAD
Sh "23" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 11.57 9.5504
$EndPAD
$PAD
Sh "24" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 13.35 9.5504
$EndPAD
$PAD
Sh "25" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 15.13 9.5504
$EndPAD
$PAD
Sh "26" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 16.91 9.5504
$EndPAD
$PAD
Sh "27" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 18.69 9.5504
$EndPAD
$PAD
Sh "28" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 20.47 9.5504
$EndPAD
$PAD
Sh "29" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 22.25 9.5504
$EndPAD
$PAD
Sh "30" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 24.03 9.5504
$EndPAD
$PAD
Sh "31" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 25.81 9.5504
$EndPAD
$PAD
Sh "32" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 27.59 9.5504
$EndPAD
$PAD
Sh "33" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 27.59 -9.5504
$EndPAD
$PAD
Sh "34" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 25.81 -9.5504
$EndPAD
$PAD
Sh "35" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 24.03 -9.5504
$EndPAD
$PAD
Sh "36" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 22.25 -9.5504
$EndPAD
$PAD
Sh "37" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 20.47 -9.5504
$EndPAD
$PAD
Sh "38" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 18.69 -9.5504
$EndPAD
$PAD
Sh "39" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 16.91 -9.5504
$EndPAD
$PAD
Sh "40" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 15.13 -9.5504
$EndPAD
$PAD
Sh "41" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 13.35 -9.5504
$EndPAD
$PAD
Sh "42" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 11.57 -9.5504
$EndPAD
$PAD
Sh "43" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 9.79 -9.5504
$EndPAD
$PAD
Sh "44" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 8.01 -9.5504
$EndPAD
$PAD
Sh "45" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 6.23 -9.5504
$EndPAD
$PAD
Sh "46" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 4.45 -9.5504
$EndPAD
$PAD
Sh "47" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 2.67 -9.5504
$EndPAD
$PAD
Sh "48" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po 0.89 -9.5504
$EndPAD
$PAD
Sh "49" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -0.89 -9.5504
$EndPAD
$PAD
Sh "50" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -2.67 -9.5504
$EndPAD
$PAD
Sh "51" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -4.45 -9.5504
$EndPAD
$PAD
Sh "52" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -6.23 -9.5504
$EndPAD
$PAD
Sh "53" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -8.01 -9.5504
$EndPAD
$PAD
Sh "54" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -9.79 -9.5504
$EndPAD
$PAD
Sh "55" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -11.57 -9.5504
$EndPAD
$PAD
Sh "56" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -13.35 -9.5504
$EndPAD
$PAD
Sh "57" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -15.13 -9.5504
$EndPAD
$PAD
Sh "58" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -16.91 -9.5504
$EndPAD
$PAD
Sh "59" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -18.69 -9.5504
$EndPAD
$PAD
Sh "60" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -20.47 -9.5504
$EndPAD
$PAD
Sh "61" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -22.25 -9.5504
$EndPAD
$PAD
Sh "62" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -24.03 -9.5504
$EndPAD
$PAD
Sh "63" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -25.81 -9.5504
$EndPAD
$PAD
Sh "64" O 1.2 1.7 0 0 0
Dr 0.7 0 0
At STD N 00E0FFFF
Ne 0 ""
Po -27.59 -9.5504
$EndPAD
$EndMODULE SDIP64
$EndLIBRARY




Kerusey Karyu

[[e-mail] [kicad-users]]

Hi,

brilliant! - that one works great, the oval pads that you have used makes the clearances a bit bigger too, so while my version is not a million miles away, I think that your one will be better.


Thanks very much again,



regards
Dave